Baudis Jiří - Baudismodel, Sportovní 424, 790 81 Česká Ves , Czech Republic, e-mail: info@baudismodel.com
| Wingspan: | 3050mm |
| Area: | 59,4dm2 |
| Aspect ratio: | 15,66 |
| Airfoil: | DP |
| V-tail span: | 586mm |
| V-tail area: | 5,64dm2 |
| V-tail aspect ratio: | 6,1 |
| V-tail airfoil: | DP |
| Weight: | 2100 ÷ 3400g / 3600g (with lead ballast cubes) |
| Wing loading: | 35 ÷ 57 / 60g / dm2 |
Watch Ceres flying video in video section.
Ceres is competition model F3B/F3Fcategory. Their aerodynamic design is complete subordinated to maximal performance in F3B tasks (duration, distance, speed) with specially accent for task speed. On the beginiing its development was acquisition of 3D CNC milling machine which allow us produce several of prototypes wing in short time and with high preciseness. We tested four different airfoils on platform of model Trinity and we decided use very fast airfoil from airfoil designer Dirk Pflug (DP airfoils).
Arose first prototype of model Ceres with wingspan 2,8m. This model I used on Viking Race 2006 and also on F3B eurotour competitions in Lunen and Munich. On the basis of experience with this prototype we finished complete new model Ceres with wingspan 3,05m which we offer to you as latest version high competition model from our firm.
Construction of model is fully composite with using of carbon of all stressed parts. For wingspar is used high modular carbon with very low ductility and with combination of kevlar honeycomb arose light and very stiff construction. The surface of wing is complete from carbon fabric on all version. Also fuselage is almost 100% carbon composite.
After first presentation on eurotour competition in Salzburg 2007 signify interest about this new model several of top pilots lokking for recipe to new tactic flying in this category. Over very short time for preparation to World Championship F3B 2007 had decided use it there Böhlen Andreas(SUI), Hoffmann Peter (AT), Pantano Francisco (ARG) and next pilots. During second half on season 2007 were added to us also part of Kika team (Seyfang M., Trautwein U., Muff J.). On year 2008 we will see fly Ceres by lot of other top pilots in this category.
We offer to customers complete finishing of our models as new service.
In January 2006 we made crucial step in technology improvement and we installed 3D milling machine. This equipment allows x1230 y2000 z130mm modelling. We also offer 3D milling on request. Please, don't hesitate to contact us.