Banana - NA

Banana - NA

NA - not available Version: slope, electro, DS, set Wing: one part, balsa sendvich, carbon in ailerons, possibility make two or four flaps, for DS version full carbon wing V-tail: glass, reinforced with carbon rovings Fuselage: two parts, glass, reinforced with carbon rovings, tube for load for DS version, electro fuselage ideal for 7 cell Version set: one wing, slope fuselage ...

More informations >>>
Cyril

Cyril

Cyril is the successor to the Ceres Lift. It has improved production technology. Especially, the fuselage is lighter and stiffer at the same time. Inside are built ribs that allow to use better, more accurate linkagee to the v-tail. It is a model of classical concepts with excellent performance in any weather condition. Some pilots still prefer it over models with high aspect ratio wing. It is first model where we used RDS system for whole win ...

More informations >>>
Ceres Lift

Ceres Lift

Ceres Lift is the successor of model Ceres. The requirement of pilots was to improve the performance of the model during the start and duration. This was accomplished by changing the profile. The model is still very fast and at the same time there was an improvement on the task distance too. Andreas Böhlen won Oktoberfestpokal München 2008 with this model.

More informations >>>
Ceres

Ceres

Ceres is competition model F3B/F3Fcategory. Their aerodynamic design is complete subordinated to maximal performance in F3B tasks (duration, distance, speed) with specially accent for task speed. On the beginiing its development was acquisition of 3D CNC milling machine which allow us produce several of prototypes wing in short time and with high preciseness. We tested four different airfoils on platform of model Trinity and we decided use ver ...

More informations >>>
Discus 2b - NA

Discus 2b - NA

NA - not available Scale: 1:6 Model full GFK, ready for fly Two wings (abachi or balsa sendvich), elevatore, rudder and steven, fuselage, cocpit with details, servo covers, joiners, screw Version Abachi sendvich Balsa sendvich (weight about 100g less) Retractable gear

More informations >>>
Wasabi - Total Aerobat - NOT AVAILABLE

Wasabi - Total Aerobat - NOT AVAILABLE

The Wasabi is a 60inch molded slope soared designed for "Total" aerobatics. It is the fruit of the team work between French aerobat master Jérome Bobin, airfoil designer Thierry Platon and Flybiwo. The wing airfoils have been specifically designed by Thierry Platon to provide the Wasabi with powerfull but precise roll and camber control as well as an impressive speed range. The Wasabi is hollow molded for better respect of the airfoils and ri ...

More informations >>>
Big Ceres

Big Ceres

When developing the latest addition to our Ceres lineup - the Big Ceres - we wanted to create a model with large wingspan and with almost unlimited speed envelope. For wings we used a proven fast airfoil from our flag ship Ceres F3B, cross tail provides more control and much needed stability during thermal and acrobatic soaring. The quality of construction and used materials meet the highest standards of the competition’s gliders. ...

More informations >>>
F3K

F3K

"Chicco is a competition model of category Discus Lunch Gliders, development and technical solutions created my cooperation with baudismodel. The design is based on my years of experience with category F3K in representational level. Chicco is built with the highest quality composite materials in conjunction with the technology used only by baudismodel gives the greater strength while maintaining weight. Chicco is produced in two versions-DBo ...

More informations >>>
Ventus 2c - NA

Ventus 2c - NA

NA - not available Scale: 1:6 Model full GFK, ready for fly Two wings (abachi or balsa sendvich), four flaps, elevatore, rudder and steven, fuselage, cocpit with details, servo covers, joiners, screw Version Abachi sendvich Balsa sendvich (weight about 100g less) Retractable gear

More informations >>>